- Delete photo next to "Add supplier invoice" removes the photo open in
the previewer (wrong upload, or one of several for the same PO) after an
inline "Delete …? Yes, delete" confirm; the confirm resets when you
switch photos. Not offered for the PO PDF.
- POST /api/v1/collection-confirm/delete-photo (browser session) →
deleteCollectionPhoto: takes the file off every order line carrying it
(or the stock purchase's photo slot) and deletes the AI's reads of it
plus the checks built on them (shared forgetReads with Move photo).
- Removed the header's blue "Run agent scan" button and its results panel
(not in use); the /api/v1/agent/scan route stays for the agent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drivers photograph invoices per item and can't see which order a photo
lands on. B&R invoice 00282979 (stock order PO26100702STK) ended up on
the thinners line of PO202610017BLY; the AI read "PO26100702STK" off it
but the card only said "not found".
- The card list now carries each read's po_refs and source file, and sets
ai_doc.other_po when the document names a PO that exists and isn't the
row's PO (none named, or this card's PO among them: no hint).
- PO card: "Photo may be for <PO>" in the header; when open, "Invoice <no>
is for <PO>, not this PO" with a Move photo button. Nothing moves on its
own.
- POST /api/v1/collection-confirm/move-photo (browser session) →
movePhotoToPo: copies the photo to the target (a collected line of a
customer PO, or the stock purchase's single photo slot — refused when
taken), removes it from the source, deletes the AI's read of it and the
checks built on it so it is re-read where it now belongs.
- normalizePoReference moves to the client-safe src/lib/po-reference.ts
(re-exported from the matching service).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The n8n tick was calling in every 5 minutes but WFDASH answered
"disabled" because Collection checks was off in Settings → AI, and
nothing on Collection Confirm said so.
- New "AI checks" switch next to Refresh, the same setting as Settings →
AI → Collection checks. Purple and "On" when running, with the last
run in the tooltip; a gear links to /settings/ai.
- GET/PUT /api/v1/collection-confirm/ai/enabled (browser session). Only
reads/writes collection_ai_enabled and the last run — no key, model or
prompt goes through it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
I5: a customer row without a SKU returns needs_sku and creates nothing; the
Add to POS button is disabled for it ("Set a SKU first").
I6: a createStockItem failure is caught per row (status failed + error), the
route still 200s, and the page toasts "N added, M failed, K need a SKU".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PocketBase drops unknown fields on update, so before the migration runs
the AI's prices would land with no purple marker and no notes. The
manual button / MCP now return 409 'not set up yet' instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- M1: fillQuote and the tick refuse templates ("quote is not open
(template)"); both quote pages gate the fill button with
canAiFillQuote (new/follow_up/claimed, not a template).
- M4: run summary keeps <= 20 errors of <= 300 chars (boundRunErrors).
- M5: forced runs offer never-tried lines before tried ones.
- M6: counts route 400s on ids that aren't PB record ids.
- M7: a fill never replaces a supplier already on the line.
- M8: warn dot on the AI marker when a pending fill has doubts.
- M9: MCP hint states the real eligibility rule.
- M10: detail-page price dialog re-reads the line before recording an
AI review.
- M11: exported QUOTE_NOT_OPEN_ERROR_PREFIX / AI_DISABLED_ERROR used by
the run route.
- M14: prompt textarea maxLength 50000.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A source line whose AI fill is still pending review (isAiFillPending) is
copied without cost, selling price, markup or supplier, so the purple
draft price can't resurface as an ordinary price on the copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- decideWithAi throws on stop_reason max_tokens instead of returning a
partial answer; fillQuote marks a requested line the AI did not answer
as error (retried after 1 h), never a permanent no_match.
- QUOTE_MAX_LINES 30 -> 15; the tick also caps lines per quote so the
60-line budget reaches other quotes.
- runAssistantTick stops starting quotes after a 90 s time budget and
returns reason running while a newer start than the last summary is
under 10 minutes old (lease).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Aligns the tool policy, the system prompt, the MCP route and the skill
doc so they describe the same boundary, with tests pinning the policy
and prompt text.
The docs and the executable policy had drifted apart — the skill doc
advertised capabilities the policy does not grant, which is worse than
not documenting them: an agent reading the doc will plan around a tool
it isn't allowed to call.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Gives the operator two new controls on a collection-pool stop, and fixes
the audit feed they write into.
Back-to-pending (`items/[id]/back-to-pending`)
A stop has to come back when the driver can't take it — no-show,
wrong date, supplier pushed the delivery — or when the supplier
confirmation was premature. A row can be assigned to a driver and/or
marked ready at the same time, so the route clears both in one write
rather than making the operator unwind them in the wrong order.
Collection date (`items/[id]/collection-date`)
`order_items.collection_date` was a PB date field that existed but
nothing read or wrote it. On a PENDING stop it is a forecast — the
supplier said goods land on the 20th, so the stop stays
un-assignable because promising a driver a pickup for goods that
don't exist yet would be a lie. On a READY stop it is the confirmed
collection day.
Notes feed (`src/lib/note-feed.ts`)
`notes` on order_items / stock_purchase_items is NOT free text — it
is a JSON array of NoteEntry objects, and every consumer parses it as
one. The assign route's "mark ready" path wrote a plain string into
it, which silently destroys the entire history: the next parse falls
back to an empty feed. All writers now go through `appendNote` with
the row's current value. Lives in `src/lib` rather than a page view
model because both the client pages and the server routes need it,
and an API route must never import from `app/(app)`.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two quote-flow defects found while auditing Q202610315.
1. Delivery-note quotes were being dumped into the rep approval queue.
A DN quote is never sent on its own — it goes out with the note, via
the note's "Send the delivery note and quote to the customer" button.
But `generateQuotePdf` auto-flipped every non-terminal quote to
`approval_pending`, which overwrote the DN status before the
skip-approval branch in `sendQuoteEmail` could ever run. Ten DN
quotes were sitting in Pending Approval as a result.
- `createQuoteFromDeliveryNote` now creates the quote `approved`
rather than `delivery_note`.
- The PDF render no longer flips DN quotes at all, as a backstop.
- The quote page gets a non-sending action row pointing back at the
note. No "send" button — a second way to email a customer the same
invoice is a liability, not a feature.
Also fixes a latent duplicate-invoice bug: the duplicate guard
pinned `status = "delivery_note"`, so once the quote had been sent
it fell through and a second quote could be raised for the same
note. Verified by test — the old guard silently minted a duplicate.
2. `quotes.company` never followed a customer change.
`quotes.company` is a denormalised copy of `customer.company` and
PB does not re-cascade relations, so swapping the customer left the
old company behind forever (Q202610315 read "Mre" while its
customer sat at Harmony — two contradictory companies on one row).
The customer swap ran as a raw client-side PB PATCH that wrote only
`customer`, which also bypassed the server's placeholder guard. It
now goes through `PATCH /api/v1/quotes/[id]/pdf`, which cascades
both relations atomically.
The customer-facing PDF already read `customer.expand.company`,
which is why this never reached a customer — but every consumer of
the quote's own `company` got the wrong answer. A read-only audit
(`scripts/audit-quote-company-drift.mjs`) puts it at 2,591 of 9,950
quotes. That data is NOT backfilled here.
Also drops the duplicate standalone "COMPANY" column on the quote
detail page, and the stale-company fallback in approvals, so this
class of bug can't hide in the UI again.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A driver reports an item as out of stock; the item goes back to the
collection pool flagged. Then nothing could ever clear it — no route,
no button, in either app. The line stayed red-flagged for good even
after the supplier confirmed stock was back, and the pool had no way
to say "this one's fine now".
Adds a dedicated clear-problem endpoint rather than reusing
/assign. /assign computes item_status + drv_status + drv_id and
blanks assigned_at on every non-assign call, so routing "in stock
again" through it would drag the row's assignment state along with
it. This route writes the three problem fields and nothing else, so
it cannot clobber a driver assignment made while the supplier was
being chased.
problem_notes is cleared too, deliberately. It's the driver's own
words and the flag is what the UI keys off; leaving it would keep
the detail popover reading "No Stock" after the operator confirmed
otherwise.
The Out of stock pill sits ABOVE the Ready/Pending badge, not below.
A row can legitimately be both — this happens to be one right now:
supplier confirmed ready, driver then found none on the shelf.
"Ready · Out of stock" back to back reads as a contradiction, so
out-of-stock takes the prominent slot.
Problem fields now ride through on stock rows too, since the driver
app reports stock-side problems on stock_purchase_items and the
operator needs the same control there.
One box at /search (sidebar, under Dashboard) covering orders, quotes,
both purchase-order flavours, suppliers, companies, customers and stock
items. Replaces guessing which screen held the answer.
Window: 90 days (UNIVERSAL_SEARCH_WINDOW_DAYS) on orders and quotes —
the two that grow without bound. Suppliers, companies, customers and
stock items are searched in full because they don't expire and an
operator searching for one expects to find it at any age. The UI states
the window so a miss reads as "aged out", not "broken".
THE INVARIANT — a cap must never look like emptiness
Every group reports `total` (uncapped) separately from `hits` (capped),
plus `truncated`. The UI renders "showing 25 of 1,240 — refine". This is
the property the 500-cap bug in orders-service violated: the newest 110
orders silently vanished and it read as a missing search field. The type
makes `total` structurally independent of `hits.length`.
Symmetrically, a source that fails or times out renders as an explicit
"couldn't search quotes" row. "We couldn't search X" and "no X matched"
are different statements and must never look alike. All nine sources
fan out in parallel and settle independently.
PERFORMANCE
Profiling the first build showed 7.8s per search — ~3.5s of it pure
data-fetching (1,070 orders / 4,288 line items re-read on every
keystroke) against ~10ms of actual matching. Added:
- order snapshot (headers + items + supplier names), 60s TTL
- reference-collection cache, 5min TTL
- per-query result cache, 60s TTL
Cold ~4.5s, warm 250ms-1.6s, repeat query 0ms. The page pre-warms on
mount via an empty-query request, so the ~4.5s cold build happens while
the operator is still reading the box rather than in front of them.
Orders match supplier NAMES, not relation ids — verified live that
"truco" returns the Truco order, the 6 matching quotes AND the supplier.
NO Reps group, deliberately
A rep is a filter, not a page: this app has no user detail view and no
page accepts ?search=. A Reps group would be rows whose every link
404s. `orders.rep` is a matched field on the Orders source, so
searching "tiaan" still returns exactly his 96 orders — which is what
was actually asked for.
PO hits link to their parent order, since there is no standalone PO
detail page; orphaned POs fall back to the PO PDF.
Tests: 15 cases over the pure layer — ranking tiers, best-of-not-sum
scoring, filter escaping against injection, the window maths, group
ordering, and the cap/failure invariants. One of them caught a real
defect: scoreField lowercased the haystack but not the query, so an
uppercase query scored 0 against every row.
Searching for a supplier returned nothing even though the order existed
with that supplier set and "TRUCO" in the line description.
Root cause is not search coverage — it's a stale safety cap. The search
path fetched the active candidate set with a fixed `perPage: 500`, on the
comment's reasoning: "91 active orders out of 4,782, so the cap is
unreachable in practice." Measured on live PB 2026-10-14 the active set
is 610 orders. Because /api/v1/orders/list sorts `created` ASCENDING
(oldest first, so the buyer works the queue top-down), the slice kept
the 500 oldest and silently discarded the 110 newest.
Verified against live PB before the fix:
truco -> 0 matches
skirting -> 0 matches
tiaan -> 57 matches
After:
truco -> 1 match (ORD-26-10-13-SCALPERS, collection_pool)
skirting -> 1 match
tiaan -> 76 matches (19 were being dropped too)
It presented as "some searches work and some don't": only matches on
OLD orders survived, so it looked like a missing supplier field rather
than truncation, and the supplier lookup added in efb5a53 inherited the
bug rather than causing it.
Fix: `perPage: activeIds.length` so the candidate set is never sliced.
The set is already bounded by COMPLETED_WINDOW_DAYS plus the non-terminal
statuses, so it grows with daily throughput, not total history.
Regression test seeds 520 active orders with the needle on the newest,
so an ascending sort puts it past the old cap. Verified it FAILS against
the old code and passes against the new.
Three changes to the POS sale pipeline, all in one commit because
pos-service.ts / types.ts / pos-app.js are each touched by all three and
splitting them would only produce intermediate broken states.
VAT is now charged on top, not backed out
Catalogue prices are ex-VAT: `selling_price` is derived as
`cost_price x markup` from the supplier's ex-VAT cost, with no VAT
uplift anywhere (verified — median selling/cost across the catalogue is
exactly 1.8). The till nevertheless treated them as VAT-inclusive and
recovered the net with `total / 1.15`, so every sale was recorded with
an understated net and an understated VAT line.
An R100 ex-VAT line now rings up as R115. The rate comes from the till's
letterhead, read server-side rather than accepted off the wire, and is
stored per sale so a later letterhead rate change cannot rewrite what
was charged. All 3,623 catalogue prices are untouched.
Ad-hoc "custom" lines
A cashier can now ring up something that was never a catalogue item —
"bolt cutting" at R20 agreed at the counter — via a new
"+ Add a custom item" composer. The line prints on the slip and lands in
pos_sale_items, but carries no stock_item relation and takes no stock
movement: no ledger row, no current_qty decrement, no catalogue entry.
pos_sale_items.stock_item is no longer required at the schema level and
an explicit `is_custom` flag marks the line, rather than inferring it
from a blank relation — so "how much did we make on bolt cutting this
month" is a plain query, and a future stock-less line type cannot be
confused with a corrupt one.
Custom lines are refused on account sales: those raise a delivery note
the customer signs for and feed their statement, so an ad-hoc charge
must not slip onto one. Enforced server-side, not just in the UI.
Discounts are now 20% or 40%, nothing else
The R-off / %-off pills and the free-typed number box are gone. The
server treats DISCOUNT_PERCENT_OPTIONS as an allowlist and refuses
anything outside it rather than coercing it, so a stale till cannot
invent a discount. The discount lands on the ex-VAT subtotal, making
"20% off" a true 20% off both the net and the VAT on it.
Two defects found while doing this
pos_sales was missing six fields that checkoutSale has been writing all
along (gross_subtotal, gross_vat, gross_total, discount_amount,
discount_kind, discount_input). PocketBase accepts unknown fields
without error and silently drops them, so all 192 historical sales lack
them and a discounted sale reprinted as though no discount had been
applied. Added, plus vat_percent.
History also passed gross_total (VAT-inclusive) where the receipt
derives the gross VAT from an ex-VAT base — a reprint double-counted
VAT. Corrected.
Verification: 3860 tests pass (14 new); typecheck, lint and production
build clean; live PocketBase probe confirms a pos_sale_items row with
stock_item="" and is_custom=true round-trips, with the probe removed
afterwards.
This commit addresses issues with PDF handling in the invoicing process. The application now correctly uploads the PDF returned from QuickBooks to the appropriate order item, ensuring that the PDF is available for preview. If no PDF is provided, the system will return a clear message to the user instead of displaying a blank frame.
Additionally, the `readQbWebhookInvoice` function has been updated to include a `pdfBase64` field, allowing for better handling of PDF data. The `PdfPreviewDialog` component has been modified to manage the display of the PDF or an informative message when the PDF is unavailable.
Tests have been added to verify the new functionality and ensure that the application behaves as expected when handling PDF uploads and errors.
"QuickBooks webhook returned 400" on DN26100303, surfaced as an opaque
502. n8n (and QuickBooks) reject an invoice line with qty 0, so the send
could never succeed.
## The bug
`resolveInvoiceLineDefaults` caps the invoice qty at what was actually
COLLECTED, and guards the "nothing collected yet" case with
`collected === null`. Ad-hoc counter delivery notes don't come through
with null — they come through with `qty_collected = 0`. So they fell
through to `min(ordered, collected)` = min(11, 0) = 0.
Found by capturing the exact payload the app posts, by pointing the
webhook at a local echo server instead of calling n8n. All three lines
of DN26100303 went out as `"qty": 0`.
(That echo trick is what should have been used the first time I went
to test reachability, instead of posting a live payload to the real
webhook and creating INV30011.)
## Why the old behaviour was wrong, not just different
An existing test asserted qty 0, with the intent "don't bill for goods
that haven't arrived — show the operator a zero line and make them
follow up with the driver first."
That intent is sound. The mechanism was not: a zero-quantity line is
rejected, so the operator never saw the zero line and never got to
follow up. The intent now lives in a warning instead — the invoice
route returns `uncollectedLines`, so the operator can see which lines
have no recorded pickup before anything reaches QuickBooks.
Also fixed in the same line: `ordered ?? 1` passes 0 straight through
(`??` only falls back on null/undefined), so a row with an ordered qty
of 0 still produced qty 0. An ordered qty of 0 now falls back to 1.
Three new tests, including the invariant that no line may ever be
built with qty 0, and the exact case from your data (ordered 11,
collected 0 -> 11).
Full suite 3820 passing, tsc clean.
Quoteers reported markup changing to a random number after saving or
clicking away, and lines carrying markup = -100 that nobody had
edited. 51 quote_items rows were affected (40 of them exactly -100),
all with a real cost and selling_price = 0. All 51 reproduced exactly
from ((selling - cost) / cost * 100) — none were typed by a human.
Two independent defects, both price-rounding:
1. The approvals screen priced with Math.round(cost * (1 + m/100)) and
no precision argument — round to WHOLE RAND. A 30% markup on a
R0.07 washer became R0.00, and a selling price of 0 re-derives as
exactly -100. Rounding is now a 2dp ceiling: R0.07 @ 30% -> R0.10.
A ceiling can never collapse a positive price to zero, so that
failure mode is structurally unreachable rather than merely patched.
2. Round-to-nearest also undercut cheap lines generally: 30% on R0.07
rounded to R0.09, which re-derives as 28.6% — the "random number".
Rounding up means the price can only drift in the customer's favour.
Markup now floors at MIN_MARKUP_PERCENT (18) once a line has a cost,
applied in one place so every screen inherits it. Scoped to priced
lines: an unpriced draft (no cost) is undecided, not 0% margin, and
stays writable — 1,181 live rows depend on that. Applied at derivation
(not just on save) so -100 can no longer be computed, plus
server-side in review-approve as the authoritative gate.
order_items already carried markup min=0 plus a Math.max(0, …) clamp,
which is why no order row was ever affected. quote_items had neither.
Verified: 3,817 tests pass, typecheck clean, lint delta zero, and all
16 of the real broken rows re-priced through the new logic resolve to a
valid markup and a non-zero selling price (was 16/16 broken).
Existing negative rows are left untouched — re-pricing live quotes is a
separate, deliberate decision.
Lines were getting stuck on To Invoice cards because the page pulls
every sibling line of an order that has one ready line, and outstanding
is defined as "not ready_invoice and not invoiced". Nothing auto-advances
checked_in or collected to ready_invoice, so a card can sit there for
months with no way to express "this order is dead, take it off my
screen". Live data: 24 checked_in, 6 with_driver, 5 collected, 3
po_generated across the 16 orders that currently have ready lines.
Adds a destructive "Cancel order" button next to Invoice in QuickBooks
and Delivery Note. Order-level rather than per-line, because line items
aren't editable from this page — the buyer owns those.
The reason is required and stamped into order_item_details.cancellation
on every cancelled row. Lines already invoiced, on a delivery note, or
cancelled are left alone; the dialog states that split before you commit.
Also fixes the reason the button would otherwise be worthless:
buildOrderInvoiceCards treated cancelled and removed as outstanding, so
flipping item_status to cancelled would leave the line sitting right
where the operator was trying to get rid of it. Both now drop out.
Two requests. The second turned out to be much smaller than it
sounded.
## 1. Link an existing invoice (the backlog)
Hundreds of delivery notes were invoiced by hand before this app
existed. The invoice is already in QuickBooks; all the app needs is
the link. New "Link invoice" button beside "Create invoice" opens a
dialog that records the number and completes the note.
`POST /api/v1/delivery-notes/[id}/link-invoice` does two writes, and
the second is the one that's easy to forget:
1. `reconcileOrderItemInvoicedStatus` — stamps
`customer_invoice_number` + `invoiced_date` on the note's
order_items and moves them out of ready-to-invoice.
2. `markDeliveryNoteCompletedByInvoice` — flips the DN to
`completed` so it leaves the Active list.
Without (1) the note closes but its lines stay "ready to invoice"
forever, so the Invoicing page still shows the work as outstanding —
done in one place, unfinished in another. Items go FIRST: if that
fails the note is left open and retryable, whereas closing first
would leave a completed note with no obvious way back.
It reuses `buildReconcileRows`, the same quantity rule as the
create-in-QuickBooks path, so the invoice qty is still capped at
min(qty_collected, quantity) and a short pickup isn't stamped as
fully invoiced. A second copy of that rule is how the two paths
would disagree about what "invoiced" means.
Deliberately a SEPARATE button from "Create invoice", not a mode of
it: one fires a webhook and creates money, the other records a
number. Folding them together is how a customer gets invoiced twice.
## 2. The invoice comes back to the screen
Not a new integration at all. n8n already downloads the QuickBooks
invoice PDF and attaches it to the note's order_items as
`qb_invoice_pdf` — 1,209 items carry one today. The Invoicing page
has been printing them from PocketBase all along.
The create route now returns `invoice: { number, date, pdfFileName,
pdfRecordId }` alongside the updated DN (additive — existing callers
are untouched), and the list opens that PDF in the same preview
dialog the quote uses. Print and Download, no navigation.
The `pdfRecordId` matters: the file hangs off the ORDER_ITEM, not
the delivery note, and PB's file URL is
`/api/files/<collection>/<recordId>/<fileName>` — anchoring on the
delivery note would 404.
Verified in the browser as David Els: both buttons render in order
(Create quote · Send · Link invoice · Create invoice), the link
dialog opens on the list, and the URL never leaves /delivery-notes.
Full suite 3783 passing, tsc clean, no lint warnings.
A customer who brings goods back needs the sale reversed: the items go
back into stock and the money comes back off the till. There was no way
to mark a POS sale as refunded, so nothing stopped the same sale being
refunded twice — which credits the customer twice and puts the same
stock back on the shelf twice.
Refunds are WHOLE-SALE only by operator decision; no partial refunds.
That is what lets `pos_sales.refunded` be a boolean instead of a
per-line refund table. Three columns: `refunded`, `refunded_at`,
`refund_amount`, stamped from the sale's post-discount total, which is
what the customer actually paid.
DOUBLE-REFUND GUARD, twice over, because this is the one failure that
costs real money:
- `refunded` is read before anything else, and a flagged sale returns
409 with no stock writes at all
- the flag is stamped BEFORE any stock write, so a second concurrent
tap sees it and bails. Writing stock first and flagging last would
let both taps through.
A stock write that fails part-way does NOT roll the flag back. The
customer has their money either way, so re-running would double-credit
them; the failed lines come back in `stockErrors` for a manual count
correction, which is strictly better than a second refund.
Stock needs no schema: `return` was already in STOCK_REASON_VALUES,
just never used. Rows are written with POSITIVE change_qty and
reference_type "pos_sale_refund", leaving the original
customer_fulfillment rows untouched so the sale's own audit trail still
shows what was originally rung up.
cashup.html had expected drawer = sum of cash sales, so a cash refund
would have shown as a false variance on every cash-up after it. It now
subtracts cash refunds, and refunded sales contribute nothing to
takings for any tender.
The tender is read off the sale, never off the request — an earlier
version accepted it in the body, which would have let a caller assert
that a cash sale was really an EFT and talk the drawer out of balance.
At the till: tap still reprints, hold a sale row for 600ms to refund —
moving money sits behind a gesture you cannot do by accident. Refunded
sales stay in the list, dimmed and badged, because deleting them would
destroy the audit trail. The sheet names the items and says plainly what
happens next ("Hand back R10.57 in cash. The drawer count for this day
will drop by that amount.").
The credit slip reuses the sale renderer and the whole printer path with
`refund: true`, so there is no second printer to configure — but note
there were THREE render paths to fix (on-screen, Bluetooth text, ePOS
XML), and missing the third would have printed "TOTAL" on a credit note.
Migration applied to live PB and verified idempotent; field shapes
round-tripped on a real sale and restored. 10 new tests, 148 POS tests
pass, tsc clean, build passes. sw.js v34 -> v35 (history, cashup,
receipt and epos-print are all cache-first in the shell).
The account-sale picker filtered on three customer columns — name,
number, email. `company` on a customer row is a RELATION id, not a
name, so it could never be text-matched; the company name was only ever
resolved afterwards by `expand` for display. Typing "Sibanye" returned
nothing even though 52 people work there.
- the filter now traverses the relation: `company.company ~ q`.
Verified live: "Sibanye - Rustenburg" 0 → 52, "Adal" 0 → 2,
"Alano" 0 → 1, while "Botha" and "Smit" are unchanged at 6 and 4.
- each row carries `viaCompany`, and name matches sort above
company-only matches. PB's own sort is by name across the whole
result set, which would interleave the two bands.
- /customers returns { items, total, shown } and the till renders a
count header: "52 matches", or "Showing 100 of 122 — keep typing to
narrow". The old `slice(0, 8)` showed 8 of 52 people with nothing
to suggest 44 were missing; 15 companies have more staff than that.
The picker click handler bound to every `div` in the results box, so
adding a count header would have made it selectable and picked a
customer with an empty id. Now scoped to `.cust-row`.
Two bugs the tests caught rather than the code:
- the display cap was first set to 50 while its own comment claimed
it sat above the largest company — which has 52 staff. That
silently re-created the truncation this change removes. Now 100,
with a test asserting a 52-person company comes back whole.
- PocketBase has no escape for a literal backslash: `\'` is
accepted, but one, two or three backslashes all fail to parse and
500 the request, so typing `\` in the search box errored. No
escaping survives, so backslashes are stripped before the filter
(`M20\Nut` searches `M20Nut`) and a backslash-only query returns
nothing rather than matching every customer.
13 new tests cover the company clause, the 52-staff case, the cap,
ranking order, backslash stripping and the empty-after-strip case.
Verified live against PocketBase across 10 queries — the ranking
guarantee held on every one.
sw.js v33 -> v34: pos-app.js and pos.html are cache-first in the shell.
Two things stopped the operator quoting a delivery note. Neither was
friction; both were bugs.
1. "The status is not right"
`createQuoteFromDeliveryNote` opened with `if (dn.status !== "draft")`
and refused everything else. A note the office had already sent, or
that the customer had put a PO against, could not be quoted at all,
and the whole error message was that condition.
Now any status except `cancelled` can be quoted — cancelled is the
one genuinely unquotable state, because the work was abandoned and
pricing it would put dead goods on a customer-facing document.
Critically, the status write is now conditional. It used to force
`sent` on every create, which with a relaxed gate would have dragged
a po_received note BACKWARDS to sent and erased the fact that the
customer had sent their PO. Pricing a note is not a reason to move
it. The detail page's Create quote button was also `draft`-only and
now matches the server.
2. "It needs a supplier and this and that"
The quote was being created fine — the PDF was refusing to render.
The readiness check required four things per line, and the two the
modal already supplied were the only two that were satisfiable:
- `is_processed` was never set on a delivery-note quote, and
NOTHING could set it: the quote_items update whitelists exclude
it, and the only writer was /quotes/[id]/process. So a DN-created
quote could not produce a PDF without leaving the flow entirely.
It now derives from the confirmed pricing — cost AND selling
both present — the same rule the process page uses. A line the
operator left unpriced still blocks, so the check keeps its teeth.
- The supplier block is gone. A counter note has no parent order,
so its lines frequently carry no supplier; demanding one refused
the PDF for a field the counter form never asked for. The
supplier is still printed when present.
Signed copy is never a completion signal. The upload route only ever
wrote `signed_copy` — nothing was writing `completed` — and that is now
pinned by a test asserting create-quote never sets `completed` for any
input status, so the relaxed gate cannot introduce it.
One action set, not two
The list and the detail page each hand-wrote the same action set and
had drifted twice: the list got a pricing-review modal the detail page
never received; the detail page got Mark complete, Cancel, Download /
Regenerate PDF and Upload signed that the list never received. The
status gates drifted with them.
`DeliveryNoteActions` now owns the set, the order and the gating. Both
pages render it — icons on the list, labelled buttons on the detail —
and each supplies its own handlers, so behaviour stays where the state
lives but "which buttons, and when" is answered in one place. An
action with no handler is not rendered, so neither presentation can
invent or hide one.
Tests: 27 new. 19 pin the action set and gating, 8 cover the relaxed
gate / no-backwards / is_processed / no-supplier rules. Verified they
bite by regressing create-quote to draft-only and by restoring the
old supplier block. Full suite 3670 passing, tsc clean, no new lint
warnings.
The Create quote button fired blind: the quote appeared with whatever
pricing happened to be on the order items, and a wrong price was only
discoverable by finding the quote afterwards. A new review modal puts
the check in front of the create.
Modal (components/delivery-notes/quote-review-dialog.tsx)
- Letterhead picker. DN-backed quotes never set company_letterhead, so
the renderer defaulted every one of them to CNL.
- Cost and markup per line; selling price is DERIVED, never typed, so
the two cannot disagree. See src/lib/quote-pricing.ts.
- A no-cost line shows "No cost on file" and stays at R0.00 rather
than deriving a fake price off a zero cost, which reads as a
deliberate free-of-charge item.
- Bulk "set all markups" field — typing 25% into eight lines one at a
time is the tedium the modal exists to remove.
- Totals, with margin as a share of REVENUE not cost: 25% markup is a
20% margin, and conflating them quietly under-prices a job.
- Nothing persists until Generate. Cancel discards the whole grid.
Backend
- create-quote now accepts { letterhead, items: [{ orderItemId,
costPrice, markupPercent }] } and derives selling server-side.
- Overrides are keyed by order_item id and validated against THIS
note's lines. An unknown id aborts the create rather than moving
another order's goods into this customer's quote.
- Quote items now go out as one PocketBase batch instead of a loop of
individual creates. The batch is transactional: the old loop could
fail on line 5 of 8 and leave a real quote header attached to half
its lines. The header still has to be created first (the batch API
can't reference a record created in the same batch), so a failed
batch deletes the orphaned header rather than leaving it visible.
- Malformed bodies are 400s the operator can read, not 500s. "A quote
already exists" and "not in draft" are now 409s.
Tests
- 33 new: pricing maths, and the route's validation guards. Verified
the guards bite by removing them (2 fail) and restored.
- The existing service test's PB mock gained createBatch, modelled as
genuinely all-or-nothing — the compensation path depends on that
guarantee being real.
Full suite: 3615 passing. tsc clean.
The delivery-notes list was close to unusable: company groups initialised
to an empty Set, so `isOpen` was false for every group and the page landed
on a stack of company headers with nothing under them. The code comment
claimed the opposite of what the code did.
Screen
- Track *collapsed* group names instead of open ones. Open is now the
default with no initialisation, and it survives a list re-fetch.
- Rows expand to show the real line items (description, qty, supplier,
SKU, price, subtotal) via the existing /detail read model, cached after
first open. Ported from /quotes, which already had this affordance.
- Whole-row click removed so expanding can't be mistaken for opening; the
DN number and "Open full delivery note ->" navigate instead.
- Row tint as a derived progress ladder — no new stored statuses:
none = draft · yellow = signed copy · blue = quoted · green = po_received
`invoiced` leaves the Active tab, so Active is now genuinely what is
outstanding. Hovering the status badge explains the colour.
- DataTable gained an optional `selectionHeaderLabel`; the checkboxes
feed one action (Combine) and now say so.
Stock search
- The create-delivery-note dialog was `getFullList`-ing every stock item
with expand=supplier on each open, before a character was typed. Now a
debounced typeahead against /api/v1/stock-items/search.
- Deliberately NOT the existing quick-draft search route: that one is
served with an admin client and no session check, so its result isn't
gated on the listRule. The new route uses assertBrowserSession.
Fixes
- The PDF preview modal was clamped to 384px wide and 900px tall despite
passing max-w-[1100px]. DialogContent's default `sm:max-w-sm` is a
*variant*, so twMerge kept both and the variant won on cascade order
(verified against the compiled stylesheet: 88,536 vs 258,517). Both
preview variants now repeat the `sm:` prefix so the conflict resolves.
- Expand-panel fetch was missing the Authorization header. Dashboard auth
lives in localStorage, so route handlers cannot read it from cookies and
the request 401'd. A 401 now reports an expired session instead of a
bare status code.
Notes
- 25 new unit tests. The stage ladder and the PB filter construction are
the two places where a silent wrong answer looks like a UI bug.
- Unauthenticated write routes on delivery-notes (create, combine,
create-quote, customer-po, mark-invoiced) have no session check. Left
as-is and reported separately — locking them is an auth-behaviour change.
Whether a counter sale is invoiced or quoted is a PER-CUSTOMER
commercial decision, and it belongs to whoever is at the delivery
notes list in WFDASH — not to someone standing at the van with a
phone. So the scanner is now capture-only, and the choice lives in
the list.
The scanner keeps exactly three things: read the note, reprint it,
photograph the signed copy. The ladder buttons (Mark as loaded,
Capture PO, Move to ready to invoice) are gone from it, along with
the state they needed.
In the list, the `$` action was a permanently-disabled placeholder
reading "Invoice — coming soon (v3-D)". It is now real, sitting next
to Q (create quote) on the same row so the operator picks one or the
other per customer.
Getting there needed one substantive change. The invoice route had a
deliberate guard:
"Ad-hoc delivery notes (no parent order) cannot be invoiced
through this endpoint."
which is why the button was a placeholder — a POS-raised counter
sale has `order: null`, so it could only ever be quoted, never
invoiced. The stated reason was that "the QB webhook requires an
order_number to attach the invoice to", but that requirement is
about a non-empty reference, not about it coming from an order:
`buildQbInvoicePayload` types `orderNumber` as optional and falls
back to "". The route now always supplies one — operator override,
else the parent order's number, else the delivery note number, which
is stable, unique and traceable. That same resolved value replaces
the `dn.expand.order.order_number` read in the synthetic invoice-
number fallback, which would otherwise have thrown on an ad-hoc note.
The detail page's "Invoice via QuickBooks" button was also gated on
`expand?.order`; it now shows for any non-terminal note and opens
via `?invoice=1`, so the list links to it rather than duplicating a
financial modal (QuickBooks customer search + billing-company toggle
+ order number) that would then have to be kept in step.
Also adds a Signed column to the list. No new status value: the
`draft` status is left alone as agreed, and "paperwork is back" is
shown from `signed_copy` itself, linking straight to the file. That
is what makes a scanned-and-signed note distinguishable from a
freshly-created one in the list.
No lint errors added — both set-state-in-effect errors in the two
delivery-note pages are pre-existing and verified unchanged against
HEAD.
TWO bugs, one of which was hiding the other.
1. "No signed copy on file" for a note that had just been signed,
scanned and uploaded. The upload was never the problem — the READ
path was. `delivery_notes.signed_copy` is a PB file field with
`maxSelect: 1`: we WRITE it as an array (`signed_copy: [file]`),
but PocketBase RETURNS A BARE STRING when exactly one file is
attached. Verified on the live record after a real upload:
typeof : string
Array.isArray : false
value : "image_ar52u2hjfq.jpg"
value[0] : "i" <-- indexing yields a CHARACTER
Every read site assumed `string[]`, and not one of them threw:
- signed-copy GET: `Array.isArray(x) ? x[0] : null` returned null
for notes that demonstrably had a copy — the reported error
- delivery-note detail tooltip: `signed_copy[0]` rendered the
first LETTER of the filename
- delivery-notes-service: treated every signed copy as absent, so
the quote went out with the UNSIGNED pdf attached
- deliveries-service: reported an empty filename
- deliveries page: `.join(", ")` on a string — this one THREW,
on a page people open daily
Adds `src/lib/file-fields.ts` (firstFileName / fileNames / hasFile)
and routes all of them through it. The type was the root of the
wrong assumptions, so it is now `string | string[]` with a comment
pointing at the helper.
2. QR 28pt -> 52pt, moved to the top-right corner. Measured by
rasterising the real PDF at 200 dpi and decoding: it now reads at
1.24 px/module, where the old size needed ~2.5 — roughly double the
distance and angle tolerance.
It could not simply go at top:40: the logo is an absolute 160x100pt
block in the same corner, so the QR landed on top of it. That is
not only ugly, it breaks the QR's quiet zone — logo ink inside the
light margin makes the code refuse to decode. The logo now steps
left (right: 112 -> 106, width 160 -> 132) to give the QR the true
corner, and the company name is width-bounded ONLY when a logo is
present. The Westscott letterhead has no matching .svg in
public/letterhead/, so in practice the name still gets the full
width and stays on one line.
Nine tests pin the file-field shapes, including one that asserts the
old `.join(", ")` call really does throw on a string, so the string
case cannot be quietly dropped again.
Scan the QR printed on a delivery note, see what it is, and act on it:
reprint, photograph the signed copy, or walk it toward invoicing. It is its
own route group outside `(app)` so it gets a clean full-bleed layout and its
own manifest — "add to home screen" should give the operator a scanner, not
the CRM. Mirrors the pattern `(counter)` already uses.
Two detectors, not one. `BarcodeDetector` is fast and allocation-free but is
Chrome-only: Safari/iOS still has it "Under Consideration" (WebKit bug
#254573) and Firefox does not ship it. A scanner that only used it would
simply not work on an iPhone. So native where it exists, jsQR everywhere
else — pure JS, so no 2 MB WASM payload on a weak warehouse signal, and the
delivery-note QR is always a QR code. Both run against the same canvas frame
so the caller never branches. Also requires HTTPS, which the page says
plainly when it isn't.
The QR carries the human number, so the first call is a new resolve endpoint
mapping number -> PB id. Everything after that speaks ids, which is what every
existing route already takes. The number is shape-validated before any network
call, so a supplier's packing label can't fire a lookup.
STATUS LADDER. mark-invoiced hard-refuses anything that isn't po_received, and
customer-po refuses a note that isn't sent/loaded — so rather than offering a
button that 500s, each action only appears when the server would accept it, and
the card shows which step comes next. It routes draft -> loaded -> po_received
-> invoiced via the existing load-dn, NOT draft -> sent, because draft -> sent
means "create a quote and email it" and a warehouse scan must never trigger
that silently.
The signed-copy upload deliberately uses the upload-only endpoint, not
/api/v1/deliveries/mark-signed-copy — that one flips the note to `completed`
in the same write, which would jump a note straight past invoicing.
Manual entry is always available, so the page works on a device with no camera
or a browser that won't scan.
Tests decode the REAL delivery-note QR through the production fallback path at
print size, and assert the shape check rejects a supplier QR, a random string
and an over-long number.
An account sale at the till used to produce a delivery-note-shaped slip that
was rendered entirely on the device and printed on the 80mm thermal printer.
Nothing reached the server, so the paperwork the client signed had no record
behind it. Cash / card / EFT are untouched and still get the thermal slip.
An account sale now creates a real `delivery_notes` record. The DN is raised
server-side INSIDE `checkoutSale` rather than by a follow-up call from the
till, because the offline queue (`flushQueue`) re-posts `/checkout` and
nothing else — a client-side second call would be silently dropped for every
sale taken while the network was down, which is exactly when a till is
flakiest.
`pos_sales.delivery_note` is the idempotency anchor that makes it
exactly-once: on a replay it hands back the existing DN instead of making a
second one, and a sale whose first attempt left the field blank retries. It
self-heals.
Deliberately non-fatal: if the DN can't be created the sale still succeeds.
The money and the stock movement are real by then; failing the checkout would
leave the drawer disagreeing with the stock ledger. The till is told instead.
Also in here:
- DN number collision retry. The generator reads the highest existing number
and adds one, which is not atomic, while PB holds a unique index on it. The
POS adds a second concurrent writer, so two creates could collide and 500
on a benign condition.
- GET /api/v1/pos/sales now expands customer, customer.company and
delivery_note so history.html can rebuild the DN card on a reprint. The
nested customer.company matters — customer.company is itself a relation,
so without it the card printed a raw PB id where the name belongs.
- "Print slip" is hidden for account sales; that tender produces a delivery
note, not a slip.
New GET /api/v1/pos/delivery-note/[number]/pdf streams the A4 original behind
assertPosAuth, so the till's bearer key stays its only credential. It does not
point at the CRM's unauthenticated invoicing route.
Verified end to end against a live note: DN26100401, correct company, both
lines with pricing, PDF attached, stock decremented once, and a replay of the
same client_ref returned the same DN without a duplicate.
Every renderer funneled the PDF through a JS string and re-encoded it as
latin1. Three separate problems, only the first of which was ever real:
1. `pdf(el).toBuffer()` is NOT the buffer API — it resolves to the PDFKit
*stream* (react-pdf carries a TODO to rename it `toStream`), and under
jsdom it resolves to a bare PDFDocument handle. That is the jsdom
breakage an old comment described, but it applies to that method, not
to the module-level `renderToBuffer()` helper.
2. `toString()` renders with `compress: false`. react-pdf's own source
says why: "when rendering to string if compress=true the document is
blank". The method is flagged upstream as buggy (#2112, #2095).
3. The string round-trip mangles binary streams. Text is ASCII in the
content stream so it survives; a raster image is a compressed blob
that does not — the image object lands in the file but is never
painted. Poppler was already reporting "Bad FCHECK in flate stream".
It stayed latent because the only image in these documents is the letterhead
logo, and that logo is an SVG. SVG is text, so it round-tripped perfectly and
hid the whole thing. `0xFD` in the old comments is the fingerprint: latin1's
truncation of U+FFFD, the Unicode replacement char.
`renderToBuffer()` fixes all three in a single pass and works under jsdom, so
no fallback is needed. Note you cannot "try toBuffer, fall back to toString" —
calling `toBuffer()` first consumes the render and a later `toString()` on the
same instance returns a document with the content missing.
Three more instances of the same pattern lived outside render.tsx and are fixed
here too: the print-bundle, delivery-note-print and picking-slip routes.
`render-image-pipeline.test.ts` is the regression guard. Its size assertion is
expressed against the old uncompressed baseline rather than a round number
picked when the document was smaller — an absolute byte count is a tripwire
that fires on every feature addition, which is how a real regression gets
tuned away. Guard verified by reintroducing the old path: 2 tests fail.
actor.id must be a 15-char user id (stock_ledger.created_by is a relation to
users; a non-user id left the cost patched but unaudited). Each updates[i].id
is validated, actor.name defaults to the actor id, and the Giellie prompt now
says to pass both selling_price and markup on create and to read the item
before a partial price change. Adds tests for null / numeric-string prices
and the explicit markup:0 default-markup behaviour.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds the MCP tool stock_items.set_pricing (batched, max 100, snake_case in,
wraps updateStockItemsPricing, requires actor.id, audits cost changes in
stock_ledger). stock_items.create now accepts cost_price / selling_price /
markup (validated >= 0) and applies the default-markup helper like bulk
import. Giellie's prompt gets a pricing playbook (POS reads selling_price,
ask for missing cost/markup, never apply an unconfirmed markup); the tool is
classified as an approval-gated write. Tests cover route, policy, real
catalogue, bridge id guard and prompt.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Also log the upstream assertBrowserSession 401s for orders.review,
orders.find_duplicates and dashboard.daily_summary as an open MCP request.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- decision endpoint requires pendingKey; mismatch with the stored pending is a 409
- refuse to continue chats over 1.5M chars; compact pending.completed on save
- SSE ": ping" heartbeat every 15s, cleared on finish/cancel
- in-flight set lives on globalThis (survives HMR, shared across bundles)
- resolveOrigin ignores non-http(s) env values; log sanitised cause on tool-load 503
- approval card shows the confirm reason; trust caption updated
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Added an audit trail feature that logs every create, update, and delete action on delivery notes and orders, capturing detailed changes per field.
- Introduced the `AuditTimeline` component to display the history of changes for delivery notes and orders, enhancing traceability.
- Updated the `page.tsx` files for delivery notes and orders to fetch and display audit logs, ensuring users can view the history of modifications.
- Enhanced the `package.json` with a new migration script for setting up the audit log functionality.
This feature improves accountability and transparency in the management of delivery notes and orders.
- Enhanced `nss-fasteners-pb-import.json` to compute `selling_price` as `cost_price * (1 + 80%)` and included `markup` in the records.
- Updated `nss-fasteners-pb-transform.ts` to allow configurable CSV and output file names via environment variables, improving flexibility for different product runs.
- Added support for uploading photos in the repair detail page, including validation for file types and sizes, and implemented a dialog for creating customer quotes linked to repairs.
- Introduced a new `customer_quote` field in the `Repair` type to link generated quotes back to their respective repairs.
These changes streamline the pricing process and enhance the user experience in managing repairs and quotes.
New page lets a rep see their own rep_visits on a Leaflet map.
Defaults to last 7 days; toggleable to 14 / 30 / 90.
/rep/visits ── server-side fetch + re-export to client
/rep/visits map ── per-customer cluster, count badge, last-visit
label, popup with full per-visit timeline + notes
+ 'manual' badge, side-list of customers in window
+ search filter + heatmap toggle
Service + route (no pb-helpers):
visits-service.getVisitsForRep(repId, {from?, to?, limit?})
- admin PB (session-scoped at the route layer)
- expands customer relation, filters position_source != 'tracker'
server-side, PB date format gotcha (T → space), 5000-row cap
/api/v1/rep-visits/list GET, browser-session auth, scopes repId
from user.id (never a query param — same
hardening as POST /api/v1/visits)
Heatmap:
leaflet.heat wrapper at src/components/leaflet-heatmap-layer.tsx
- useMap() + useEffect lifecycle
- brand gradient (deep blue → green → amber → yellow → crimson)
- reads on both light OSM and dark CARTO tile sets
- maxZoom default 10 — leaflet.heat scales intensity by
1/2^(maxZoom-currentZoom); without this the OSM default maxZoom
of 18 makes points render at ~5% opacity at our default zoom 10
Other fixes landed mid-feature:
- KPI cards collapsed from 3 into 1 (clusters count is a
zoom-dependent implementation detail, not a glanceable stat)
- added 'View my visits on a map' nav link under /rep header
Dep: +leaflet.heat@^0.2.0, +@types/leaflet.heat@^0.2.5
(react-leaflet@5, leaflet@1.9.4 already present)
Tests: 50 + 34 = 84 pass in the touched (rep) area + visits-service
+ rep-visits API. Pre-existing failures on main (sidebar,
pocketbase-admin, quotes-service) confirmed unrelated by
stashing this branch.
The invoice qty rule used to read the customer's order qty regardless
of how much the driver actually collected. QuickBooks ended up billing
8-of-10 on one line and 7-of-10 on the other for Kusasalethu PO 390588
(INV10924) — a 5-unit overbilling that the mine's receiving team flags
as suspicious.
The rule now caps the invoice qty at min(qty_collected, quantity):
- Short pickup → bill what's collected, the row stays at
item_status="ready_invoice" with qty_invoiced < quantity, and a
follow-up invoice fires automatically when the rest arrives.
- MOQ overflow → still capped at the customer's order qty; the
surplus-book flow continues to route the overflow to stock.
The Invoicing page now shows "N short" / "N units short" badges on
short-pickup rows, a "N hidden" badge when supplier-side rows are
suppressed, and a "Show supplier-side lines" toggle (default OFF) so
the invoicing operator doesn't see kit-component remainders unless she
needs to. A split-remainder dialog on the order process page lets the
operator explicitly flag a remainder as exclude_from_invoice=true when
the original line was a kit (e.g. "M20 bolt comes with nut and washer"
split across 3 suppliers).
PB schema additions (one-time, run scripts/nss-add-invoice-columns.ts):
- order_items.qty_invoiced (number)
- order_items.customer_invoice_number (text)
- order_items.invoiced_date (date)
These three columns were referenced throughout the codebase but never
existed on the live schema, so writes were being silently dropped. The
schema fix unblocks the reconcile flow that stamps them after every
QB webhook returns.
Backfill for the live Kusasalethu order: scripts/nss-fix-kusasalethu-inv10924.ts
updates order_items.quantity 10→8 / 10→7 to match what was collected,
stamps the new columns, and flips order.invoiced=true.
New server helper reconcileOrderItemInvoicedStatus() runs after each
QB webhook and per-row decides:
- item_status = "invoiced" if qty_invoiced >= quantity (fully billed)
- item_status = "ready_invoice" otherwise (still partial — stays in
the to-invoice tab for a follow-up invoice once the rest arrives)
Wired into both the bulk invoicing page and the delivery-note-invoice
route. markOrderInvoiced now compares against qty_invoiced vs
quantity rather than the flat item_status check, and its error
message names the outstanding shortfall per row.
This commit enhances the stock item management by introducing automatic calculation of selling price and markup based on the cost price. Key changes include:
- Integration of `applyDefaultMarkupToPatch` to automatically set `selling_price` and `markup` at 80% of the cost price when they are not explicitly provided during stock item creation and updates.
- Updates to the `create` and `update` functions in the stock items service to ensure that existing values are respected and not overwritten if they are already set by the operator.
- Tests added to verify the correct behavior of auto-markup during both creation and updates of stock items, ensuring that the functionality works as intended across various scenarios.
This feature aims to streamline the pricing process for stock items, reducing manual input and potential errors.
Two new fields added to the customer add/edit form, both
operator-facing for the active/inactive customer workflow:
- customers.status (bool): flips the customer active/inactive.
Legacy rows pre-date the field and load as undefined; both
the form and the read side collapse that to active=true so
the migration date doesn't silently flip the existing base.
- customers.site_location (text): free-text site/shaft label
keyed off the customer's company. Distinct from the existing
'site' free-text mine tag owned by the pin tool. Storage is
plain text on purpose, with a /api/v1/customers/sites
endpoint returning distinct existing values for an input
+ datalist autocomplete under the company combobox.
surfaces:
- Active/Inactive badge on customer detail and list rows
- site_location row in the customer Details card and under
the company line on the list (desktop + mobile card)
- Switch under the sales-rep section of the form to flip
status; existing customers stay active by default
also fixes a UX trap on edit: previously opening the edit
form showed 'Select company...' / 'Select rep...' as placeholders
for an instant until the lookup lists resolved, making a real,
saved company/rep look unlinked. CompanySearch and UserSearch
now accept a selectedLabel fallback; CustomerForm passes the
resolved customer.expand.company / customer.expand.rep names
through so the triggers display the linked names immediately.
listDistinctSiteLocations helper added to customers-service.ts
alongside the existing listDistinctSites.
Doubles down on the /stock list to make catalogue and inventory
edits one-click for the operator.
What's new:
- /stock: clickable column headers on Cost / Markup / Selling
cycle none → asc → desc → none and feed through to the PB sort
param. The apply bar now commits pricing AND qty in parallel
(Promise.all against /set-pricing and /set-quantities) with
per-row failure tracking and focused error toasts. In edit
mode the row is no longer a button — inputs render in-place
for current_qty, min_qty, and target_qty alongside the existing
pricing inputs, and the row click is gated off so clicks on an
input never navigate to the detail page.
- stock-quantities-service + /api/v1/stock/items/set-quantities
(POST): bulk-update current_qty / min_qty / target_qty on a
set of stock_items rows. Whitelist-validated patches, per-row
results with stable failure reasons, and a stock_ledger row
written FIRST whenever current_qty actually moves so the audit
trail stays ahead of the cached total (same pattern as
stock-surplus and stock-booking-service).
- scripts/apply-default-markup.ts: one-shot operator tool that
seeds selling_price = round(cost_price * 1.80, 2) and markup = 80
on stock_items rows whose cost_price is set but selling_price
is zero. Bypasses STOCK_ITEM_PATCHABLE_FIELDS (operator-initiated
bulk action); idempotent (never overwrites a non-zero shelf
price or markup).
- scripts/list-irda-stock.ts: read-only inspector for the
IRIDA spray-caint line with summary counts (without
selling_price, without cost_price, zero stock) so the
operator can see exactly which rows the backfill tools above
will touch.
Tests: 81 new test cases across /stock page, stock-quantities
service + route, and apply-default-markup.
Closes the pre-Fix-#1 stock pricing gap so the till and the POS see
prices on day one.
What's new:
- price-list-service: addPriceListItems now mirrors the upserted
selling_price + markup onto the matching stock_items row when
(and only when) the stock row has no price yet. Sync failures
are returned as warnings — never as a failed price_list write,
so a single broken stock row can't poison a 500-item batch.
- stock-quick-draft-service: addQuickDraftLine seeds cost_price +
bootstraps a one-entry cost_history on inline-create when the
buyer supplies newStockItem.costPrice. Existing-item path
backfills cost_price when zero and always appends a
cost_history entry so the line addition shows up in the audit
log without waiting on bookStockFromInvoice.
- stock/items/create (POST): accepts optional costPrice,
sellingPrice, and markup on the standalone create endpoint so
the operator can stamp a price and bootstrap cost_history in
one round-trip. Empty bodies still produce an empty
cost_history (legacy callers unchanged).
- scripts/backfill-stock-prices.ts: one-shot operator tool that
mirrors price_list rows onto existing stock_items rows whose
selling_price is still zero. Pure decision function exported
for unit tests; --commit / --limit / --sku CLI; idempotent
(never overwrites a non-zero shelf price or cost).
- vitest.config.ts: pull scripts/**/*.test.ts into the vitest
include list so backfill-stock-prices.test.ts runs in
`npx vitest run` without a per-script config.
Tests: 65 new test cases across price-list-service,
stock-quick-draft-service, stock/items create, and
backfill-stock-prices.
